A Bitmain Antminer L7 (9.5Gh) that you just ordered or obtained? Do you need assistance using the Bitmain Antminer L7 (9.5Gh) on mining pools? Learn how to use your Bitmain Antminer L7 (9.5Gh) on mining pools by reading the article. Here, we’ll use the Nicehash pool as an example.
Table of Contents
What Coins Can the Antminer L7 (9.5Gh) Mine?
The Bitmain Antminer L7 (9.5Gh) is a Litecoin and Dogecoin merge miner (it can mine both coins at the same time). It mines the Scrypt algorithm, with a maximum hashrate of 9.5 Gh/s and a power consumption of 3425 W.
This miner’s design differs from earlier Bitmain Litecoin miners in another way as well. The miner is ideal for large-scale mining thanks to its modern, sleek design. The most profitable coin to mine is Litecoin, though there are other coins as well. Gulden, GameCredits, Emerald, Dogecoin, Verge, DigiByte, Einsteinium, Florincoin, Auroracoin, and other digital currencies are among those that can be mined.
HOW to USE BITMAIN ANTMINER L7 (9.5Gh) on MINING POOLS
Just follow these easy steps to configure your miner and mining pool account:
Connecting the Power Supply
- Power supply APW121417 is part of L7 server.
- Additional two power cords are needed.
Setting Up the Bitmain Antminer L7 (9.5Gh) for Mining
The miner’s web interface will now be configured.
Enter the web interface of your router to find the IP address of the AntMiner L7 miner. The miner should be labeled AntMiner in your router interface.
Connect to the web interface
- Start up your preferred web browser (like Chrome, Firefox, etc.) and IP address provided.
- It will ask you to enter a username and password. By default, the AntMiner credentials are root for both, the username and password. Change the password as soon as possible.
Installing Latest Firmware
You should see a summary of your miner’s information after connecting to the web interface. The miner firmware must then be updated to the most recent version, which can be found on the official Bitmain website.
Download the latest firmware
- Follow this link to download the latest and old firmware for AntMiner L7 (9.5Gh)
Install the latest firmware on your AntMiner L7 (9.5Gh)
- Select the System tab and move over to the Upgrade child tab.
- This page shows Restore functionalities and Flash new firmware image.
The setup and security of your miner are currently complete. Continue reading the next section to find out how to configure it for connection with a mining pool.
Connect Bitmain Antminer L7 (9.5Gh) to a Mining Pool
After successfully updating the firmware to the most recent version, you can now use the miner to join a mining pool.
Open a new browser tab and navigate to https://www.nicehash.com/asic-mining. After selecting your ASICs algorithm, click Generate Stratum.
Copy stratum server, in this case use stratum+tcp://x11.auto.nicehash.com:9200 or stratum+ssl://x11.auto.nicehash.com:443 (if ssl is supported). Step 4 of the Miner Configuration tab calls for you to type it into the URL text box.
In the text box for the worker, enter your Nicehash mining address or another BTC wallet address. You can use it like this: MiningAddress.WorkerName to name your worker.
Password should always be “x”.
Note: Because some ASICs support it, #xnsub should be used at the end of the stratum line in the URL text field (stratum+tcp://scrypt.auto.nicehash.com:9200#xnsub).
Extra-nonce subscription is referred to as Xnsub. For algorithms with extremely high difficulties and for miners with extremely high hash rates, a miner may be able to completely exhaust the nonce-space (the value that is changed for each hash in an effort to find the valid hash).
Extranonce was created to enable miners to change a small field in the coinbase and rehash a slightly different block.
By subscribing, you’re letting NH (or any pool that supports it) know that even though you’ve already sent a particular nonce, the block in question is actually different because of this extranonce field. Effectively, the nonce is made larger.
Monitor and Use Bitmain Antminer
Just as crucial as knowing how to use the Bitmain Antminer on mining pools is being able to monitor it.
In terms of monitoring, the AntMiner web interface comes with easy tooling such as the Kernel Log and Monitor tabs.
Another useful monitoring page is the Monitor status page which shows information on your miner’s status:
On this screen, you can see information about current hashrate, Uptime and current scoring rate.
On the bottom of the screen, you can see information about the speed of fans.
What is Litecoin (LTC) Mining?
A fork of the Bitcoin network called Litecoin (LTC) was made in 2011. It utilizes the Scrypt hashing algorithm, which necessitates specialized mining software and hardware. It is still among the top cryptocurrencies in terms of value and trading volume and is mineable.
Validating transactions in the blockchain, then closing and opening a new block, is the process of litecoin mining. Litecoin employs the proof-of-work consensus mechanism, which makes use of computing power to solve the nonce, a component of the hash that secures the block. The hashing algorithm encrypts a series of alphanumeric numbers into a unique value known as the hash. Litecoin is rewarded for solving the nonce.
Litecoin mining became popular in 2011 when Charlie Lee, a software engineer at Google, announced its creation as a Bitcoin fork with modifications intended to help it scale more effectively.1
Both central processing units and graphics processing units can be used to mine it on computers, just like Bitcoin. In contrast, investing in an application-specific integrated circuit (ASIC) and joining a mining pool are more lucrative and competitive.
Summary: USE BITMAIN ANTMINER L7 (9.5Gh) on MINING POOLS
This concludes our examination of mining pools’ use of Bitmain Antminer L7 (9.5Gh) hardware. This illustration of how to configure your AntMiner L7 (9.5Gh) or other miners with a mining pool may be used with other mining machinery.
Typically, miners offer a web interface that enables quick connections to mining pools.
Our aim is for you to have fun with this tutorial. Regarding your Setup experiences, feel free to share your thoughts with us!
We sincerely hope that you found this article to be useful, and we eagerly look forward to your feedback and messages. If you would, leave a comment with your thoughts below!
Is Mining Litecoin Profitable?
If you have the right setup and join a pool that splits rewards profitably, mining for litecoin can be profitable.
How Much Does Antminer L7 Make a Day?
26.39 USD / Day
*Please be aware that values are only estimates based on prior performance and that actual values may be lower or higher.