Here are two generic issues that Antminer L7 fans frequently encounter along with their corresponding fixes.
Fans are essential components of the Antminer L7 mining machine, but they can encounter common issues. In this blog post, we will provide a summary of two generic fan problems frequently faced by Antminer L7 users, along with their respective solutions. Understanding the causes and treatments for abnormal fan speed readings and the need for fan replacements will help you maintain optimal cooling performance for your mining operation.
Table of Contents
The Arithmetic Interface Shows That the Fan is Abnormal Or the Speed is 0.
Causes and Treatment
The four fans on the mining machine are labeled FAN1, FAN2, FAN3, and FAN4, respectively, on the control board and user panel, respectively. Replace the appropriate fan after first determining which one is abnormal; if the issue persists after doing so, the control board is likely damaged, so you should take it back to the manufacturer for repair.
Too High Speed
Causes and Treatment
The corresponding fan must be replaced because the damaged fan.
Contact us at any time if you have any questions.
