Bitmain Antminer L7 Normal Operating Temperature Range

This guide will show you the normal operating temperature range of the Bitmain Antminer L7 and also other Bitmian Antminer models.

The miner’s operating temperature range is 0 to 40 degrees Celsius without the influence of other factors, in particular, the intake air temperature of the Bitmain Antminer L7 should be within this range. But in practice, various factors, such as dust, humidity, etc., may reduce this range., so the recommended ambient temperature should about 15-35 °C. 25 degrees Celsius is ideal.

The max PCB temperature of Bitmain Antminer L7 is 80 degree Celsius.

The intake air temperature may be excessive even in a cool room due to dust buildup or other factors. Please clean the Bitmain Antminer L7 if necessary.

The miner’s temperature is shown differently by various models. Notably, most of Antminer ASIC miners have a protection system in place that causes them to shut down at dangerously high temperatures.

Below Shows the Normal Temperature of the Miners:

ANTMINER	Temperature in degree Celsius
L7	PCB max. 80
E9	PCB max. 80
S19XP	PCB max. 75
S19a Pro	PCB max. 80
S19a	PCB max. 80
S19j	PCB max. 85
S19j Pro	PCB max. 85
S19 Pro	PCB max. 80
S19	PCB max. 80
T19	PCB max. 80
Z15/Z15j/Z15e	PCB max. 80
S17e/T17e/S17+	PCB max. 80
T17+	PCB max. 75
S17/S17 Pro/T17	PCB max. 75
S15	PCB max. 80
T15	PCB max. 80
S11	PCB max. 95
Z9MINI	Chip max. 125
	PCB max. 80
Z9	PCB max. 80
V9	PCB max. 80
S9	Chip max. 135
	PCB max. 90
S9I	PCB max. 85
S9j/S9-Hydro	PCB max. 95
T9	Chip max. 135
	PCB max. 90
T9+	Chip max. 125
	PCB max. 95
S9 SE/S9k	PCB max. 85
B7	PCB max. 75
K5	PCB max. 80
D5	PCB max. 85
DR3/DR5	PCB max. 85
E3	PCB max. 65
L3+/L3++	PCB max. 90
D3	PCB max. 85
A3	Chip max. 115
	PCB max. 85
X3	Chip max. 127
	PCB max. 80
B3	Chip max. 127
	PCB max. 80